MICA BAND HEATERS

Application :
Die cast mould, Knife, Plastic injection tunnel & nozzle, Extrusion, Rubber moulding plates, Lab-equipment, Pipe tracing & etc.

Power Supply :
Normal range from 120VAC, 240VAC & 415VAC.

Power Output :
Normal range from 100Watts ~ 3000Watts and special Watts.

Heating Material : Mild Steel / Stainless Steel
Cover : Stainless Steel
Type of Terminal :
- Screw Ø​M5
- 2-pins Socket (male) with or w/o casing
- Porcelain Connector
- Wire

CERAMIC BAND HEATERS

Application :
Die cast mould, Plastic injection tunnel & Nozzle, Extrusion, Lab-equipment, Pipe tracing & etc.

Power Supply :
Normal range from 120VAC, 240VAC & 415VAC.

Power Output :
Normal range from 100Watts ~ 5000Watts and special Watts.

Heating Type : Open coil elements
Insulation Material : Ceramic / Alumina
Cover : Stainless Steel
Type of Terminal :
- Screw Ø​M5
- 2-pins Socket (male) with or w/o casing
- Porcelain Connector
- Wire

HIGH TEMPERATURE CARTRIDGE HEATERS

Application :
Die cast mould, solder/glue pot, strap cutting knife, Lab-equipment & etc.

Power Supply :
Normal range from 12VAC, 48VAC, 120VAC, 240VAC & 415VAC.

Power Output :
Normal range from 70Watts ~ 3000Watts and special Watts.

Size Outer Diameter :
- 6mm, 8mm, 10mm, 12mm, 16mm, 20mm, 25mm
- 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"

Length : 
- 2" / 3" / 4" / 5" / 6" / 7" / 8" / 9" / 10" / 11" / 12" / 14" / 16" / 18" / 20" / 22" / 24" / 26" / 28" / 30" / 32" / 34" / 36".

AIR FINNED HEATERS

Application :
Die cast mould, Air Con, Oil Bath, Water URN, Hot-plate, Air Duct System & etc.

Power Supply :
Normal range from 120VAC, 240VAC & 415VAC.

Power Output :
Normal range from 50Watts ~ 5000Watts and special Watts.

Shape : Straight type / U-shape type / W-shape type / double-W shape type.
Size of Terminal : Ø​M12 & Ø​M16 bush & nut.
Outer Diameter of Elements : Ø​8.0mm & Ø​11.2mm
Length of Elements : Follow customer required.

AIR/WATER TUBULAR HEATERS

Application :
Die cast mould, Air Con, Oil Bath, Water URN, Hot-plate, Sauna Machine, Food Machine & etc.

Power Supply :
Normal range from 120VAC, 240VAC & 415VAC.

Power Output :
Normal range from 100Watts ~ 5000Watts and special Watts.

Shape : Straight type / U-shape type / W-shape type / double-W shape type or others type of shape following by customer required.
Size of Terminal : Ø​M12 & Ø​M16 bush & nut.
Outer Diameter of Elements : Ø​8.0mm & Ø​11.2mm
Length of Elements : Follow customer required.

DEFROST HEATERS

Application :
Water Boiler, Water Tank, Water URN, Food Warmer, Hot Water Dispense & etc.

Power Supply :
Normal range from 120VAC, 240VAC & 415VAC.

Power Output :
Normal range from 300Watts ~ 3000Watts and special Watts.

MICA STRIP HEATERS

Application :
Die cast mould, Knife, Plastic injection tunnel & nozzle, Rubber moulding plates, Lab-equipment, Pipe tracing & etc.

Power Supply :
Normal range from 120VAC, 240VAC & 415VAC.

Power Output :
Normal range from 100Watts ~ 5000Watts and special Watts.

Type of Terminal :
ØM5 Screw / 2-pins Socket / Porcelain Connector / Wire.
Material : Mild Steel / Stainless Steel
Shape And Hole : Follow customer required

MICA SHEET HEATERS

Application :
Die cast mould, Rubber moulding plates, Food Machine, Lab-equipment & etc.

Power Supply :
Normal range from 120VAC, 240VAC & 415VAC.

Power Output :
Normal range from 30Watts ~ 3000Watts and special Watts.

Type of Terminal : Wire
Wire Length : 12" / 24" / 1M / 2M / 3M
Material : Mica Board
Shape And Hole : Follow customer required

SCREW-PLUG IMMERSION HEATERS

Application :
Water/Oil Tank, Water URN, Food Warmer, Hot Water Dispense & etc.

​Power Supply :
Normal range from 240VAC & 415VAC.

Power Output :
Normal range from 300Watts ~ 3000Watts and special Watts.

Size of Terminal (BSPT) : Ø​1" / Ø​1.5" / Ø​2" / Ø​2.5" / Ø​3"
Material of Terminal : Brass / Stainless Steel
Terminal Cover : Bakelite
Size of Elements : Ø8.0mm / Ø11.2mm
Material of Elements : Stainless Steel 304 / 316 / 316L
Length of Elements : Follow customer required.
Heating Part : Cold zone & Heating zone / Full heating zone

FLAT PLATE IMMERSION HEATERS

Application :
Water/Oil Tank, Water URN, Food Warmer, Hot Water Dispense & etc.

Power Supply :
Normal range from 240VAC & 415VAC.

Power Output :
Normal range from 300Watts ~ 3000Watts and special Watts.

FLANGED IMMERSION HEATERS

Application :
Water/Oil Tank, Water URN, Food Warmer, Chemical & etc.

Power Supply :
Normal range from 240VAC & 415VAC.

Power Output :
Normal range from 300Watts to 5000Watts and special Watts.

Size of Flange : Ø​4" / Ø​6" / Ø​8" / Ø​10" 
Material of Flange : Stainless Steel
Terminal Cover : Stainless Steel
Size of Elements : Ø8.0mm / Ø11.2mm
Material of Elements : Stainless Steel 304 / 316 / 316L
Length of Elements : Follow customer required.
Heating Part : Cold zone & Heating zone / Full heating zone

CERAMIC BOBBIN HEATERS

Application :
Heat Shrink Machine, Hot Store/Warehouse, Corrosive, Chemical Tank, Portable Curing Heater & etc.

Power Supply :
Normal range from 240VAC & 415VAC.

Power Output :
Normal range from 300Watts to 5000Watts and special Watts.

QUARTZ IMMERSION HEATERS

Application :
Paper Drying process, Heat Shrink Machine, Hot Store/Warehouse, Corrosive, Chemical Tank, Portable Curing Heater & etc.

Power Supply :
Normal range from 240VAC & 415VAC.

Power Output :
Normal range from 500Watts to 5000Watts and special Watts.

CERAMIC INFRAPARA HEATERS

Application :
Paper/Paint Drying process, Heat Shrink Machine, Packaging Machinery, Hot Store/Warehouse, Corrosive, Portable Curing Heater & etc.

Power Supply :
Normal range from 120VAC, 240VAC & 415VAC.

Power Output :
Normal range from 100Watts to 3000Watts and special Watts.

CAST-IN ALUMINUM HEATERS

Application :
Semiconductor and Plastics Processing, Packaging Machinery, Food service, Paper Processing, Hot Melt Adhesives, Medical Equipment, Heat Transfer Presses & Textile Manufacturing.

Power Supply :
Normal range from 240VAC & 415VAC.

Power Output :
Normal range from 1000Watts to 5000Watts and special Watts.

Type of Terminal :
Screw / 2-pin Socket / Porcelain Connector.
Shape & Hole : Follow customer required.

HIGH TEMPERATURE OPEN COIL HEATING ELEMENTS

Application :
This heating elements outperform in all temperature ranges, from element temperature 50ºC to 1850°C (120-3360°F), and atmospheres.

Brand Elements : Rascal (From Europe)

Power Supply :
Normal range from 240VAC & 415VAC.

Power Output :
Normal range from 1000Watts to 5000Watts and special Watts.

HIGH TEMPERATURE COIL HEATERS (Hot Runner)

Application :
Plastic Die Application, Blow Molding Machine, Extrusion, Hot Runner Systems, Injection Molding, Thermoforming & etc.

Heating section : 2.2 x 4.2 / 3 x 3 / 3.4 x 3.4 / 3.5 x 3.5 / 4 x 4mm.

Heating coil (iD) : Ø​10mm ~ 50mm.
Heating height of ring : 40mm ~ 200mm.

Power Supply :
- Normal range from 230VAC & 415VAC.

Power Output :
- Normal range from 150Watts to 3000Watts and special Watts.

Built-in thermocouple :
- With or without "J-Type" thermocouple.

Wire Length :
- 1 meter standard length of lead wire.
- Special required length as 2 meters or 3 meters.

HOT PLATE HEATERS

Application :
Kitchen Equipment, Food Machine, Hot Water Dispense & etc.

Power Supply :
Normal range from 220~240VAC.

Power Output :
Normal range from 500Watts to 2000Watts.

HOT PLATE COIL HEATERS

Application :
Kitchen Equipment, Food Machine, Hot Water Dispense & etc.

Power Supply :
Normal range from 220~240VAC.

Power Output :
Normal range from 1800Watts to 2000Watts.

FLEXIBLE SILICONE DRUM HEATERS

Application :
Silicone Drum Heaters are resistant to most chemicals, fungus and moisture, and can be easily cleaned.
The temperature is controlled by built-in adjustable thermostat (20°C ~ 120°C).

Power Supply :
Normal range from 220~240VAC.

Power Output :
Normal range from 500Watts to 2000Watts.

SELF-LIMITING HEATING CABLES

Application :
Self-limiting Heating Cables for freeze protection and temperature maintenance of vessels, pipework, valves, gutters, cold room & etc.

Power Supply :
Normal range from 220~240VAC.

Power Output :
Normal range from 25Watts to 100Watts per meter.

ANTI-CONDENSATION HEATER

Application :
Anti-condensation Heater suitable for installation in all enclosures panel and protect equipment from low temperature humidity or water damage due to condensation.